We are mainly looking for export queries.
Material | SS, MS |
Grade | Asme A 194 Gr. 2, 2hm, 2h, Gr 6, B 7, B 7m |
Material | SS |
composition | Phosphorus: 0.040% maximum; Sulfur: 0.050% maximum |
Grade | Astm / Asme A 193 B 6, B 7 / B 7m, B 16 |
Description: A flat washer which can be square or circular, with one bearing surface having an oblique angle.
Applications/Advantages: Commonly used when fastening bolts through the flanges of "I" beams.
Material: Washers shall be made from a carbon steel which conforms to the following chemical composition requirements (heat analysis): Phosphorus: 0.040% maximum; Sulfur: 0.050% maximum
·Hardness: Plain or Zinc-plated - Rockwell C 38 - 45
Hot-Dip Galvanized - Rockwell C 26 - 45
Plating Plain, Zinc-plated or Hot-Dip Galvanized.
Carbon & Alloy Steels Grades:
Surface Finish | Zinc-plated |
Material | SS, MS |
Alloy Steels Grades | Astm / Asme A 193 B 6, B 7 / B 7m, B 16 / Astm / Asme A 194 Gr. 2, 2hm, 2h, Gr 6, B 7, B 7m |
Description: A flat washer which can be square or circular, with one bearing surface having an oblique angle.
Applications/Advantages: Commonly used when fastening bolts through the flanges of "I" beams
Material: Washers shall be made from a carbon steel which conforms to the following chemical composition requirements (heat analysis): Phosphorus: 0.040% maximum; Sulfur: 0.050% maximum
Hardness: Plain or Zinc-plated - Rockwell C 38 - 45
Hot-Dip Galvanized - Rockwell C 26 - 45
Plating Plain, Zinc-plated or Hot-Dip Galvanized.